ICC Windows or monitoring supported Inverter and Batteries or can be used to monitor supported batteries (Cell voltages, Amps , Volts , Temperature , Cycles)

Installer

• Lock Inverter settings page and control
• Select Inverter faults to be notified.
• Decrypted logs (Inverter faults and inverter settings changes)
• Own email addresses for fault notifications
• Email decrypted log files
• Axpert type inverters – Battery load control
• Lock MQTT
• Installer can set inverter settings via MQTT app. Client not allowed.

With ICM you can do the following:

• Upload everything happening in your solar system to emonsms.org. PVoutput.org also supported.
• Will warn you of any faults in your system when completing the emails settings in ICM.
• MQTT for live display values (bidirectional). For Android devices you can use MQTT dash.
• Color Gauges based on load settings (Red, Yellow and Green)

Switch between grid and battery mode based on time setting or state of charge.

ICM Features

• Real-time monitoring of all the different power sources in use in a solar system (solar panels, batteries, grid power, etc).
• Multiple Dashboards.
• Support  Serial (RS232) or (RS485) only
• Monitor each inverter separately with individual Inverter settings.
• Monitor each inverter totals (PV , Load and Grid), temperature, load percentage.
• Monitor batteries Charge and Discharge KWh.
• Reporting of estimated battery runtime to user SOC set-point
• Calculating the total cost savings brought about by the solar system.
• Can gather over 60 different values from every connected inverter.
• Totals can be exported to CSV format.
• Multiple dashboards available anywhere in the world presenting everything happening in the system in real-time
• Can monitor up to 9 inverters (All must be the same Model/type) Serial (RS232)
• Can monitor grid tie as well as hybrid inverters.
• Monitor and display Listed batteries per cell voltages.
• Hourly trend analysis of load, solar production, battery charge/discharges well as utility consumption and/or production.
• Victron ET112 Energy meter
• Support Victron MPPT Controlers up to 7
• Advance Power Management , Support for up to 6 switches controlled independently (Sonoff Wifi Switches flashed with Tasmota firmware). Switch on extaction Fans automatically when inverterters or batteries running to hot base on temperatures.

Inverters

Pylontech

(Support up to 16 Pylontech C Versions , Support 8 B versions for 1 Group and 16 C And B Versions providing the C is the master BMS)

BMS Detailed info

Advance Power Management (Wifi)

Free ICM MQTT Client (per sec update)

ICC Windows compatible OS:

• Windows 7 and grater
• Powerd USB Hub for more than 4 Inverters or devices

Supported Inverters:

• All Voltronic type inverters like Axpers , Kodak ,Mecer , Synapse  and RCT etc
• Sunsynk 3 phase (12kw , 20kw ,50kw) up to 9 Inverters
• Sunsynk single phase (3kw , 5kw, 8kw, 16kw) up to 9 Inverters
• Deye 3 phase (12kw , 20kw ,50kw) up to 9 Inverters
• Deye single phase (3kw , 5kw, 8kw, 16kw) up to 9 Inverters
• Turbo Energy 3 phase (12kw , 20kw ,50kw) up to 9 Inverters
• Turbo Energy single phase (3kw , 5kw, 8kw, 16kw) up to 9 Inverters
• InfiniSolar VI / VII Hybrid
• MPPSOLAR LV 5048
• MPPSOLAR LV 6048
• MPPSOLAR LV 6548
• PIP4048 MSD Single
• PIP 5048 MG
• PIP 5048
• PIP-5048GK
• PIP-5048MK
• SOL-I-AX-5T Duo/Trio MP
• SOL-I-AX-5NB
• SOL-I-AX 8k/ 8KW
• STECA SOLARIX PLI (5000-48, 2400-24, 1000-12)
• Vollkorn
• Sako
• Solarwize
• Schubart 5KW
• Growatt SPF 3500/5000 ES
• Alfa 3 KVA , Alfa 5 KVA
• Conversol Duo 3KVA
• EASUN 5KW
• EASUN IGrid SV II
• EASUN IGrid-SV-IV-5.6KW
• Effekta
• Fusion 5 KW Off-Grid Inverter
• Rentech MKS2-5600
• Sacolar 5kw
• Synerji
• Ecco HIN5500S
• FCS-K3-VP-3000
• VP-2000
• Sumry
• ESENER 5.5Kw
• 6 KW Sacolar Sunforce M6000HX-48-BP
• SolarMax SM-ORION-DUAL-PV8000
• SolarMax SM-ORION-DUAL-PV11000
• Esener 5Kw
• Solarix KingStar
• FIVESTAR 5kw (Note note all supported) Contact support.
• Must 3kw/5kw

Supported BMS:

• Pylontech all low voltage
• Pylontech HV (High Voltage) H48050, POWERCUBE X1
• Synapse
• Hubble X100. Hubble X101
• Hubble AM2/AM3 (RS232)
• Hubble AM4 (RS232)
• Hubble AM5 (RS232)
• Revov 2nd life R100 (RS485)
• Revov B100 (RS232)
• Narada NFPC48100 (RS485)
• BMV Monitor Models (Requires V.E. Direct Cable)
• BMV Smart Shunt (Requires V.E. Direct Cable)
• Rentech Lithium 48V (RS232)
• Rentech Lithium 24V (RS232)
• BSL Lithuim (RS485)
• Leoch (RS232)
• The Sun Pays 4.8 kWh (RS232)
• Hoselect GE48100W Lithium (RS232)
• Narada 150 AH (RS232)
• First National Lithium (RS485)
• Daly BMS (RS485/RS232)
• BlueNova RackPower BN52V-100-5.2k-DU/BP (RS232)
• Bull Lithium BMS (RS232)
• Seplos BMS (RS485)
• LBSA 48v 100A (RS485) Lithium batteries South Africa
• Shoto SDA10-48100 (RS485) , Shoto SDA 48100 (RS232)
• VestWood VT48100B (RS485)
• Weco BMS (RS232) Basic
• Averge 48v100A BMS (RS232)
• Enersol 48V 100MB (RS232)
• Apium AP-5 Wall Mount 48V (RS232)
• Greenrich Lithium-ion Battery (RS232/RS485)
• Taico Lithium-ion Battery (RS232/RS485)
• Trophy battery (RS485)
• SOK SK48v100 Battery (RS232)
• BAK – 48v Lithium-ion Battery
• Pytes E-BOX-48100R
• Iseli-Lithium-Iron-LFeLi-48100MB
• Solarpower24 LIFEPO4 battery 100ah
• Sunsynk 5.32KW Lithium Battery LFP
• BlauHoff (RS232) console port
• VOLTA Lithium (RS232)
• Protea LiFePO4 PLB530 48V (RS232)
• Protea LiFePO4 PLB256 24V (RS232)
• Esener ES-5.12KWH (RS232)
• SVolt (RS232)
• SVolt 24V (RS485)
• JK BMS (RS485)
• ZTE BMS ZXDC48 FB101 (RS232)
• VTC Power Vxl5100 (RS232)
• Jakiper (RS232)
• ECCO 51.2V 100AH (RS232)